A corridor stain in St Julian’s can easily turn into uncertainty. Was the issue in the bathroom, a pipe route, a drain, a neighbouring wall or older moisture? The right answer was to inspect the property before opening finishes.
What we checked
The bathrooms were isolated and a hot-water pressure test was carried out. During the inspection, the thermal camera showed a suspicious heat pattern near the bath mixer area.
Acoustic listening at the same location picked up activity consistent with a pressurised leak. That correlation gave the repair team a much better target than opening several possible areas.
Why this matters
Thermal imaging does not see water through walls. It shows temperature patterns. In this case, the useful part was the agreement between the symptom, the hot-water test, thermal pattern and acoustic activity.
For similar worries, book bathroom leak detection or thermal leak detection before breaking tiles. If the property is in the area, see our St Julian’s leak detection page.
Recommended next step
Open the marked area first, repair the suspected connection, pressure-test again and reinstate only after the repair is confirmed.